Message-ID: <002a01c3e91c$0c8673c0$6507a8c0@Main>
From: "Alan Melia" <Alan.Melia@btinternet.com>
To: rsgb_lf_group@blacksheep.org
References: <HNEGLMNKFOEMMNHIFAPIMELLCDAA.g4wgt@talkgas.net> <002001c3e91a$09af22c0$ade486d4@erica>
Date: Sun, 1 Feb 2004 23:35:14 -0000
MIME-Version: 1.0
Subject: LF: Re: Re: RF level meter
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Sender: <owner-rsgb_lf_group@blacksheep.org>
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org

Hi Peter I have a couple of Racl-Dana 5002s here. They give that message
when the back-up Li-batt has gone down or been replaced. There are a set of
buttones that you push to clear the message.
With the 5002 the clear is "special function 97.1 "  I think the clear is by
pressing 0 (that is zero),  SHIFT ,  SF (that is the special function key)
in sequence. That will clear the message if the batt is above 2.8V It should
stay clear.
 I hope that helps.......my 5002s are not as useful as athey are wide band
rather than selective, and are "available" if anyone is interested

Cheers de Alan G3NYK
alan.melia@btinternet.com

----- Original Message -----
From: "g3ldo" <g3ldo@ukonline.co.uk>
To: <rsgb_lf_group@blacksheep.org>
Sent: 01 February 2004 22:58
Subject: LF: Re: RF level meter


> I have a Racal-Dana True RMS RF Level Meter 9303. It reads RF level OK but
I
> get this flashing message
> Er 01, which according to the operator card means "Memory Corrupted, refer
> to handbook".
> Snag is I don't have a handbook. There seems to be a lot of interesting
> computing that can be don with this instrument if only it were working
> properly.
> Can anyone help?
>
> Regards,
> Peter, G3LDO
>
>
>
>
>