Content-Transfer-Encoding: 8bit
Message-ID: <C75A388845B4B54B9CF5E2ADB589B0E3031AEFBC@btss.siemens-pse.sk>
From: "Gasparik Richard" <Richard.Gasparik@siemens.com>
To: rsgb_lf_group@blacksheep.org
Date: Wed, 14 Jan 2004 15:56:06 +0100
MIME-Version: 1.0
Subject: RE: LF: RE: Key in QRS??
Content-Type: text/plain; charset=iso-8859-2; format=flowed
Sender: <owner-rsgb_lf_group@blacksheep.org>
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org

DX4WIN, WriteLog, CT by K1EA and other programs using following interface:

Pin numbers from the LPT DB25 male connector:
Pin1 = CW keying (Strobe signal)
Pin16 = PTT (Init signal)

73 de Rich OM2TW


-----Original Message-----
From: Rik Strobbe [mailto:rik.strobbe@fys.kuleuven.ac.be]
Sent: Wednesday, January 14, 2004 3:49 PM
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: RE: Key in QRS??


Hello Ed and Rich,

Implementing a fast CW keyer with all the goodies such as variable speed, 
memo etc.. is not a simple task.
So far I stayed away from this as I believed that there is plenty of fast 
CW software available and there is no need of re-inventing the wheel.

A much simpler task however is to change the configuration of the LPT  (or 
COM) port in QRS, to make it identical to DX4WIN or whatever is your 
favorite fast CW software.
Just let me know what pins are used (for key and for PTT) ...

73, Rik ON7YD

>Good idea. I have 2 interfaces build (for CW and also for QRSS) and
switched
>by LPT switch. For CW I'm using internal keyer from logging program DX4WIN
>and QRSS with QRS (ON7YD). Problem is that both are working on LPT, but
>intrefaces are not identical.
>
>Rich OM2TW
>
>Btw, all HW is ready for expedition to the 135m high tower, weather is very
>good, snow is melting away. We will be QRV direct from PI-match under the
>antenna.
>
>
>
>-----Original Message-----
>From: Ed Lesnichy [mailto:ed@dx.ru]
>Sent: Wednesday, January 14, 2004 5:17 PM
>To: Rik Strobbe
>Subject: LF: Key in QRS??
>
>
>Dear Rik,
>
>I for a field/DXpedition conditions should carry an external electronic key
>or ordinary key for realization CW QSOs. Such external key to me should be
>connected to TX.
>
>It would be convenient to have a key(from PC's keyboard) in QRS.
>A keyboard's key in the program have all contest-programs.
>Hot  key  is  standart:  ALT-K for enable/disable keyboard CW mode and
>open/close small window, and ALT-V for set(Vary) CW speed.
>All external connections PC - TX already are in PC(QRS)- TX
>
>Whether probably such to add internal keyboard's key in next QRS's
>versions and under same interface (as for QRSS) via COM/LPT?
>
>TNX for QRS!
>
>73! Ed RU6LA  ed@dx.ru  http://136.73.ru
>
>P.S. Do you received my special QSL-card?