From: "WE0H" <we0h@core.com>
To: "Post Rsgb_Lf_Group" <rsgb_lf_group@blacksheep.org>, 
 lowfer@mailman.qth.net
Subject: LF: LPT/Parallel port setup for transmitting???
Date: Thu, 25 Jul 2002 18:25:45 -0500
Message-ID: <KLEFIABELPJAFJEAGFHHCELCCIAA.we0h@core.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Importance: High
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Sender: <majordom@post.thorcom.com>

I am using Windows 3.11 with the QRS 3.17 program and keyer design that
comes with the program. I am keying an Epson Oscillator with a 10k resistor
in series with the collector of the NPN transistor. I am using pin 2 of the
LPT port. Pins 18 thru 25 are tied together and to the transmitters ground.
I am not getting any keying and don't see any change in voltage on pin 2. I
have tried a DOS program from Lyle (K0LR) and his program didn't switch any
of the lines either. Is there something I need to do in Windows to get the
port running??? I am ready to give up and go with a memory keyer real soon.
Thanks es 73's,
Mike>WE0H
http://www.we0h.us/lf.html
185.303kc QRSS/CW
ID is "WE"
Not on yet...