Message-ID: <3A804E7D.3C7FBE6B@ns.sympatico.ca>
Date: Tue, 06 Feb 2001 14:20:29 -0500
From: "John Currie" <john.currie@ns.sympatico.ca>
MIME-Version: 1.0
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: G-VE by XDV?
References: <3A7EA689.29299.CF057E@localhost>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Sender: <majordom@post.thorcom.com>

Dear Mike I checked the shots from Markus and looked over  my shots from sat
night.  Yes I believe your sigs are there. I can't,  however prove it as I
could see no dots Condx were poor last night and I saw only a few isolated
lines.   DFC39 was S-9  at 0342Z but  I think only XTZ was on then
 73 de John VE1ZJ

Mike Dennison wrote:

> Thanks to Markus, DF6NM, and John, VE1ZJ, for their
> spectrograms of last Saturday night's transatlantic tests. I am
> particularly grateful as it appears from careful analysis of the pics
> that my signals got across, too. I don't think I have my wishful
> thinking filter switch in.
>
> I transmitted 10s dots until about midnight 0.4Hz HF of Jim. My
> dashes can be clearly seen on Markus's picture (posted to the
> group under the title "Signals around 135.923"). You can't see much
> of the Morse itself because he has optimised for 30s dots, but it can
> be worked out.
>
> Right at the start of John's first picture (at
> http://www.wireless.org.uk/newspic44.htm ) you can see a trace
> above Jim's dashes, disappearing after a few characters. I made
> the vertical scale on John's and Markus's spectrograms the same,
> and five transmssions (G3XDV, M0BMU, G3XTZ, G3YXM, G3AQC)
> fit perfectly. The attached composite image shows this.
>
> Of course, a couple of blobs on a screen are not enough, but
> encouraged by this I will transmit 30s dot CW this evening (actually
> groups of one or three dashes as my keyer won't do greater than
> 10s dots!).
>
> Thanks again fellers.
>
> Mike, G3XDV (IO91VT)
> http://www.lf.thersgb.net
>
>   ------------------------------------------------------------------------
> The following section of this message contains a file attachment
> prepared for transmission using the Internet MIME message format.
> If you are using Pegasus Mail, or any another MIME-compliant system,
> you should be able to save it or view it from within your mailer.
> If you cannot, please ask your system administrator for assistance.
>
>    ---- File information -----------
>      File:  ve-xdv1.jpg
>      Date:  5 Feb 2001, 13:08
>      Size:  8662 bytes.
>      Type:  JPEG-image
>
>   ------------------------------------------------------------------------
>                   Name: ve-xdv1.jpg
>    ve-xdv1.jpg    Type: JPEG Image (Image/JPEG)
>               Encoding: BASE64