Message-ID: <133.200101081426@gemini>
From: "James Moritz" <j.r.moritz@herts.ac.uk>
Organization: University of Hertfordshire
To: rsgb_lf_group@blacksheep.org
Date: Mon, 8 Jan 2001 14:30:18 +0000
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII; format=flowed
Content-Transfer-Encoding: 8bit
Subject: LF: Bonfires
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Sender: <majordom@post.thorcom.com>

Dear Dave, LF Group,

Sorry to hear about G3YXM's slight overheating problem. This type 
of thing is certainly a hazard with LF - I expect most people have 
their tales to tell. It is one reason why I don't leave my station 
running in beacon mode while I sleep; it is also a good reason for 
having the loading coil located away from the house.

I have found that the biggest problem comes from damp timber. If in 
a high voltage field, the losses are rather high, so it gets hot. Little 
white arcs form on the surface of the wood, and wander around in 
a fascinating way, leaving charred trails, and setting fire to things. 
It is very impressive at night. Paradoxically, dry wood seems to be 
much less prone to this. During the summer, I made a shelter for 
my loading coil from 47 x 47 mm preservative treated timber 
covered with plastic sheet. This doubled the loss resistance of the 
antenna, and it was obvious that the wood had a high moisture 
content. Replacing the original wood with thinner, kiln-dried stuff 
solved the loss problem. Then the plastic sheet developed a leak, 
one piece of timber got wet, and the result was a minor fire - luckily 
I caught it early. The rebuilt shelter uses heavier polythene 
sheeting which is more carefully sealed, and has stood up well to 
the wind and rain of the last few months (fingers crossed!). The 
high voltage antenna connection passes via a ceramic feed-
through mounted in the middle of a rigid plastic sheet which forms 
the roof. The feed-through by itself did not have adequate 
insulation. I have also installed a cheap 1kW fan heater, so the 
whole lot can be dried out from time to time. I think thoroughly 
varnishing the wood woud help a lot, but this is a job for next 
summer.

I would certainly be interested to hear of a material for making 
loading coil shelters which is at the same time fireproof, a good 
dielectric, and easily worked.

Hope you are back on air soon, Dave,

Cheers, Jim Moritz
73 de M0BMU