Message-ID: <002801c0726a$ff1c04a0$399901d4@g4jnt>
From: "Andrew Talbot" <G4JNT@thersgb.net>
To: rsgb_lf_group@blacksheep.org
Subject: LF: Re: Argo beta 1 released
Date: Sat, 30 Dec 2000 14:15:42 -0000
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Sender: <majordom@post.thorcom.com>

Downloaded ARGO, installed and tested 100% OK.
Decodes my 10Hz wide SMT Hell beacon signal on the " 10s " dot setting.

A few more settings would be useful how about binary increments of dot
length from say 0.5 to 32s. and an indication of the frequency resolution.
Also I would prefer a monochrome palette as an option, weak signals stand
out better in a grey scale.  Alternatively a colour one going from red
through yellow,  to green to blue is an 'industry standard' for waterfall
plots.

Andy  G4JNT


-----Original Message-----
From: Alberto di Bene <dibene@usa.net>
To: rsgb_lf_group@blacksheep.org <rsgb_lf_group@blacksheep.org>
Date: 29 December 2000 17:58
Subject: LF: Argo beta 1 released


>I have just uploaded Argo beta 1, a QRSS/DFCW viewer.
>You can download it from  http://www.qsl.net/i2phd/argo
>
>Please test it and give your impressions, suggestions,
>critics, etc.
>
>It won't touch in any way your Windows mixer, so those
>who were scared by the first build of Spectran beta 4
>can rest assured that no harms will be done to their PCs.
>
>The current presets are only tentative, and can be changed
>following your suggestions.
>
>Waiting for your feedback,
>
>Alberto     I2PHD
>
>P.S. The package contains a readme with all the instructions.
>Please read it.
>
>
>