Message-ID: <001201bfb155$1400da80$c200bed4@DeWildeg>
From: "Gaspard De Wilde" <on4zk@vt4.net>
To: rsgb_lf_group@blacksheep.org
Subject: LF: Re: IK1ODO  qrp beacon active
Date: Fri, 28 Apr 2000 23:02:10 +0200
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Sender: <majordom@post.thorcom.com>

hello Bruno
your sigs are ooo with .125hz on spectran display
dificult to read with . 065hz
still mmm with .250hz
remarkebel  with .5hz 
73s  de ON4ZK   
-----Oorspronkelijk bericht-----
Van: M. Bruno <spin@inrete.it>
Aan: rsgb_lf_group@blacksheep.org <rsgb_lf_group@blacksheep.org>
Datum: donderdag 27 april 2000 22:36
Onderwerp: LF: IK1ODO qrp beacon active


>My QRP DFCW beacon is active again for the weekend.
>
>Operating conditions now:
>
>Frequency 137.792 / 137.793 kHz, shift about 1.03 Hz
>
>Frequency is controlled by the usual "stupid" XTAL in air, so
>don't expect more than 0.2 Hz stability. However, I hope
>to be clear of the Loran-C lines (thank you Alan for the
>details about the line frequencies; I decided to stay in the
>middle).
>
>Power is 10W to the aerial, so about 10 mW radiated
>(0.55A into 32 mOhm).
>
>Mode is DFCW, the upper frequency is the dash, the lower
>is the dot. Speed 30s dots, 10s intervals. This should
>be about optimal for Spectran use at 0.032 Hz resolution.
>
>I hope to leave the TX running until May 2 in the morning.
>
>Again, any report is welcome.
>
>
>73 - Marco IK1ODO
>
>spin@inrete.it
>
>Rivalta, ITALY JN35SA (N 45 01' 25.6", E 7 31' 09.4")
>
>
>
>