From: =?iso-8859-1?Q?VIGILANT_Luis_Fern=E1ndez?= <luis@vigilant.es>
To: "rsgb_lf_group@blacksheep.org" <rsgb_lf_group@blacksheep.org>
Thread-Topic: LF: RV: EbNaut modulator for G0MRF D class PA
Thread-Index: AdSRUvuqLgLnK3xSQMm+c5RX1a197wAoJxkgAZtUWoD///aeAP//sVIg
Date: Thu, 20 Dec 2018 16:56:27 +0000
Message-ID: <6DB8451D7F3D3947A5918808A59621EA314E01B0@servigilant.vigilant.local>
References: <6DB8451D7F3D3947A5918808A59621EA26394C6B@servigilant.vigilant.local>
 <6DB8451D7F3D3947A5918808A59621EA263994F4@servigilant.vigilant.local>
 <7266837.20181220130456@gmail.com>
In-Reply-To: <7266837.20181220130456@gmail.com>
Accept-Language: es-ES, en-US
Content-Language: es-ES
MIME-Version: 1.0
Subject: RE: LF: RV: EbNaut modulator for G0MRF D class PA
Content-Type: text/plain; charset="iso-8859-1"
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Content-Transfer-Encoding: 8bit

Hi Chris

Once we have the pcb validated and no more modifications needed I will publish the gerbers and artwork in pdf for anyone interested
in replicating the circuit

I'm not interested in selling a kit. May be David, G0MRF, can add this to his range of kits. Would be the way to go and he is experienced in
helping the Ham community providing parts and pcb's. I just contribute with the pcb design. The circuit was an idea of Riccardo, IW4DXW
implemented and tested by Antonio IK1HGI

73 de Luis
EA5DOM

-----Mensaje original-----
De: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] En nombre de Chris Wilson
Enviado el: jueves, 20 de diciembre de 2018 14:05
Para: VIGILANT Luis Fernández <rsgb_lf_group@blacksheep.org>
Asunto: Re: LF: RV: EbNaut modulator for G0MRF D class PA


Hello Luis

Are  you  intending  to have a few made and sell these boards, or make the  file  available  so someone could have a few made? Thanks for our work on this, I have a G0MRF amp board for LF.... :)

Thursday, December 20, 2018, 12:49:15 PM, you wrote:

>   
>  
>  
> Hi All
>  
>  
>  
> Made a new PCB for the XOR modulator which can be soldered directly 
> over the right side of the SMD 4013 chip in the G0MRF PA design
>  
>  
>  
> All you need is to remove R3 and R4 left pin from PCB and connect to this module.
>  
> No need to remove the 4013. The original 4013 is NOT removed and keeps 
> on pcb but bypassed
>  
>  
>  
> Attaching pictures is not working for my messages trought blacksheep. 
> This are the links to a couple of pictures
>  
> https://www.dropbox.com/s/xau7vv5l5k8w75s/2018-12-20%2013.14.52.jpg?dl
> =0
>  
> https://www.dropbox.com/s/cqepu1v8j6b39op/2018-12-20%2013.15.13.jpg?dl
> =0
>  
>  
>  
> Will send a pcb to Alberto, EA4GHB, to validate assembly in the 
> original pcb
>  
>  
>  
> 73 de Luis
>  
> EA5DOM


--
Best regards,
 Chris                            mailto:dead.fets@gmail.com