Message-ID: <5C2FBBE6.4050906@posteo.de>
Date: Fri, 04 Jan 2019 21:02:46 +0100
From: DK7FC <selberdenken@posteo.de>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
MIME-Version: 1.0
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: Ublox 8 question
References: <1762043626.20190104174530@gmail.com>
In-Reply-To: <1762043626.20190104174530@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org

Chris,

See 
https://www.u-blox.com/sites/default/files/NEO-LEA-M8T-FW3_DataSheet_%28UBX-15025193%29.pdf 
and connect your probe (of the scope) directly to the pins.

Am 04.01.2019 18:45, schrieb Chris Wilson:
>
> Hello  LF'ers,
>
> My newly arrived Ublox 8 and breakout board has landed and I have had
> a very quick play with it and the Ublox UCentre software. I have set
> Time0 to give say a 1 mHz output in UBX / CFG / TP5 but scoping that
> through hole on the breakout board shows no output. I did instruct it
> to write to the device, and it sticks. What I am unsure about is where
> I should be taking the scope ground to, I used the shell of the USB
> connector socket. i am hoping it's not a fake or knackered... It came
> from the same place Stefan suggested and is the same model and same
> break out board he posted. Any idea if it's me being stupid again, and
> I have overlooked the obvious? Thanks.
>
>
>
>