Message-ID: <572A3FA6.1090707@posteo.de>
Date: Wed, 04 May 2016 20:29:58 +0200
From: DK7FC <selberdenken@posteo.de>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
MIME-Version: 1.0
To: rsgb_lf_group@blacksheep.org
References: <154777e5a99-7794-fc2f@webprd-a10.mail.aol.com> <5728DB40.3010107@abelian.org> <57291999.6070601@posteo.de> <5729211C.1030208@posteo.de> <5729AB92.1070905@abelian.org>
In-Reply-To: <5729AB92.1070905@abelian.org>
Subject: Re: VLF: EbNaut transmissions on lower frequencies?, pre-tests: 6.47
 kHz
Content-Type: multipart/alternative;
 boundary="------------020401040402070707020303"
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Status: O

This is a multi-part message in MIME format.
--------------020401040402070707020303
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit

Hi Paul,

R, i understand. Last night the antenna current was 165 mA only because 
it was a bit detuned. Also the output transformer is quite loud at 6.47 
kHz so i had to stop during the working day. I think the core begins to 
saturate at that frequency and the output voltage is even higher due to 
the higher total loss resistance (2 additional coils).
A few minutes ago i put some more iron power cores 'into the field'. 
They are a different type but that doesn't matter.
The WX is perfect see, 
https://dl.dropboxusercontent.com/u/19882028/VLF/20160504_195418.jpg
The resonance dropped closer to 6.47 kHz, i can and am running *200 mA 
now, since 18:08 UTC*. I will run it for some hours, maybe through the 
night. The PA power supply shows 23V*3.7A = 85W input power. With 200 
mA, i have 10.5 kV rms on the wire.

Last night, the 50s symbols at just 165 mA was quite critical i think. 
But we can afford to risk something after so much success now. Also, 50s 
was the longest length to be finished when work starts here in the building.

Now, unfortunately i lost access to my Raspi in the forest. It seems to 
need a restart. This happens after running a few weeks without a reboot. 
I have to find the problem...
Will be in the tree again tomorrow if the WX is fine. Then the system 
will come back on air.

Tell me if you found the best settings so i can start a message. I would 
assume that 100s symbol length should be no problem on that frequency 
and 200 mA.

73, Stefan

Am 04.05.2016 09:58, schrieb Paul Nicholson:
>
> > f = 6470.000 Hz
> > Start time: 03.05.2016   22:30:02 UTC
> > Period: 50 s
> > Length: 5
>
> No decode so far but that's no surprise.  I need to find the
> right settings for this frequency: calibrating the E and H
> rx phase and finding the best pre-blanker filter settings.
>
> The filter settings become more critical down here because
> some mains harmonics start to appear in the pass band.
>
> Is it possible to send a few hours of carrier?
> -- 
> Paul Nicholson
> -- 
>

--------------020401040402070707020303
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 8bit

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Hi Paul, <br>
<br>
R, i understand. Last night the antenna current was 165 mA only because
it was a bit detuned. Also the output transformer is quite loud at 6.47
kHz so i had to stop during the working day. I think the core begins to
saturate at that frequency and the output voltage is even higher due to
the higher total loss resistance (2 additional coils).<br>
A few minutes ago i put some more iron power cores 'into the field'.
They are a different type but that doesn't matter.<br>
The WX is perfect see,
<a class="moz-txt-link-freetext" href="https://dl.dropboxusercontent.com/u/19882028/VLF/20160504_195418.jpg">https://dl.dropboxusercontent.com/u/19882028/VLF/20160504_195418.jpg</a><br>
The resonance dropped closer to 6.47 kHz, i can and am running <b>200
mA now, since 18:08 UTC</b>. I will run it for some hours, maybe
through the night. The PA power supply shows 23V*3.7A = 85W input power.
With 200 mA, i have 10.5 kV rms on the wire.<br>
<br>
Last night, the 50s symbols at just 165 mA was quite critical i think.
But we can afford to risk something after so much success now. Also,
50s was the longest length to be finished when work starts here in the
building.<br>
<br>
Now, unfortunately i lost access to my Raspi in the forest. It seems to
need a restart. This happens after running a few weeks without a
reboot. I have to find the problem...<br>
Will be in the tree again tomorrow if the WX is fine. Then the system
will come back on air.<br>
<br>
Tell me if you found the best settings so i can start a message. I
would assume that 100s symbol length should be no problem on that
frequency and 200 mA.<br>
<br>
73, Stefan<br>
<br>
Am 04.05.2016 09:58, schrieb Paul Nicholson:
<blockquote cite="mid:5729AB92.1070905@abelian.org" type="cite"><br>
&gt; f = 6470.000 Hz
  <br>
&gt; Start time: 03.05.2016   22:30:02 UTC
  <br>
&gt; Period: 50 s
  <br>
&gt; Length: 5
  <br>
  <br>
No decode so far but that's no surprise.  I need to find the
  <br>
right settings for this frequency: calibrating the E and H
  <br>
rx phase and finding the best pre-blanker filter settings.
  <br>
  <br>
The filter settings become more critical down here because
  <br>
some mains harmonics start to appear in the pass band.
  <br>
  <br>
Is it possible to send a few hours of carrier?
  <br>
--
  <br>
Paul Nicholson
  <br>
--
  <br>
  <br>
</blockquote>
</body>
</html>

--------------020401040402070707020303--