Date: Tue, 30 Oct 2012 14:37:46 +0100
From: Steinar Aanesland <saanes@broadpark.no>
In-reply-to: <8CF84A2D46CF8AF-FDC-4F78A@webmail-m161.sysops.aol.com>
To: rsgb_lf_group@blacksheep.org
Message-id: <508FD82A.4070202@broadpark.no>
MIME-version: 1.0
References: <87D0548217184BC58AF939DEA4CF768C@intelp4>
 <8CF84A2D46CF8AF-FDC-4F78A@webmail-m161.sysops.aol.com>
User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:16.0) Gecko/20121010
 Thunderbird/16.0.1
Subject: Re: LF: RE: JT9-10 Decode DK7FC
Content-type: text/plain; charset=windows-1252
Content-transfer-encoding: QUOTED-PRINTABLE
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Hi Markus

I had no luck with Stefan last evening , no asterisks and no echo

2315   5  -29  -0.8 1432.73  0.00
2320  10  -12   0.2 1439.73  0.00
2325   5  -29   0.4 1428.55  0.00
2330  10  -12   0.0 1439.73  0.00
2335   4  -30   0.0 1420.20  0.00
2340  10  -14   0.2 1439.73  0.00
2345   6  -29   0.2 1427.61  0.00
2350  10  -19   0.2 1439.73  0.00
2355  10  -23   0.4 1429.87  0.00
0000  10  -18   0.2 1439.73  0.00
0005  10  -25   0.0 1429.84  0.00
0010  10  -17   0.2 1439.73  0.00
0015   0  -33   0.9 1456.33  0.00
0020  10  -12   0.0 1439.73  0.00
0025   1  -33   0.0 1451.72  0.00
0030  10  -12   0.0 1439.73  0.00
0035  10  -26   0.2 1429.83  0.00   DF6NM GN ALL
0040   0  -34   0.4 1440.21  0.00   000AAA 000AAA RA90

I managed to decode your signal
even if it looks like you are slightly out of sync.

https://dl.dropbox.com/u/16381257/capt14.jpg



LA5VNA Steinar
loc:JO59jq
Mal and spam filtering: STRONG
www.opera.no




Den 30.10.2012 11:45, skrev Markus Vester:
> Similar here, most (but not all) slots decoded successfully,=20
but mostly with asterisks. Strange that the quiet slots at odd
ten minute multiples also achieved 10 sync points - perhaps the
echo effect again? The first line went wrong only because my decoder
was still set to 5 minutes.
> =20
> Even with 1 Hz tolerance the CPU is getting pretty busy - maybe in =
a future version we could select whether we want multiple decodes or =
not? On one of my machines I can't use 48 kS/s for WSPR and WSJTx bec=
ause that samplerate is too far off, so being able to choose between =
12 and 48 kS/s aquisition would also be useful.
> =20
> Best 73,
> Markus (DF6NM)
> =20
> 0040  10  -24  -0.6 1940.53  0.00   000AAA 000AAA RA90   =20
> 0050   0  -37   0.0 1938.40  0.00
> 0100  10   -9   1.7 1939.83  0.00    DK7FC JN49IK        =20
> 0110  10  -18   0.4 1939.83  0.00
> 0120*********   1.7 1939.83  0.00    DK7FC JN49IK        =20
> 0130  10  -18   0.4 1939.83  0.00
> 0140*********   1.7 1939.83  0.00    DK7FC JN49IK        =20
> 0150  10  -19   0.9 1939.85  0.00
> 0200*********   1.7 1939.83  0.00    DK7FC JN49IK        =20
> 0210  10  -17  -1.3 1939.75  0.00
> 0220  10   -9   2.2 1939.83  0.00
> 0230  10  -20   0.9 1939.85  0.00
> 0240*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0250  10  -17   0.4 1939.83  0.00
> 0300  10   -9   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0310  10  -19   0.4 1939.83  0.00
> 0320*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0330  10  -18   0.4 1939.83  0.00
> 0340*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0350  10  -18   0.4 1939.83  0.00
> 0400*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0410  10  -18   0.4 1939.83  0.00
> 0420*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0430  10  -19   0.4 1939.83  0.00
> 0440*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0450  10  -19   0.4 1939.83  0.00
> 0500*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0510  10  -19   0.4 1939.83  0.00
> 0520*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0530  10  -18   0.4 1939.83  0.00
> 0540*********   1.3 1939.83  0.00    DK7FC JN49IK        =20
> 0550  10  -18  -1.7 1939.89  0.00
> 0600   2  -35   0.9 1939.85  0.00
>=20
>=20
>=20
>=20
> -----Urspr=FCngliche Mitteilung-----=20
> Von: Terry GW0EZY &lt;gw0ezy@sky.com&gt;
> An: rsgb_lf_group &lt;rsgb_lf_group@blacksheep.org&gt;
> Verschickt: Di, 30 Okt 2012 2:36 am
> Betreff: LF: RE: JT9-10 Decode DK7FC
>=20
> Decode OK but same again =96 Sync and dB values shown as **** (usua=
lly indicates values exceed expected)
> =20
> 0120*********   0.9 1138.38  0.00    DK7FC JN49IK
> =20
> I have reduced the tolerance to +/- 10. I checked JT9-30 and the Wi=
de Graph scale shifts again requiring another retune and increase of =
FFT Bins/Pixel to get 1140 kHz on screen (136.3 + 1140)
> =20
> 73 Terry
> =20
>=20
> From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_grou=
p@blacksheep.org] On Behalf Of Terry GW0EZY
> Sent: 30 October 2012 01:14
> To: rsgb_lf_group@blacksheep.org
> Subject: LF: JT9-10 Decode DK7FC
>=20
> =20
> A decode of your JT9-10 transmission. I wonder why the Sync and dB =
values are shown as **** ??
> =20
> 0100*********   0.4 1138.38  0.00    DK7FC JN49IK =20
> =20
> Waiting for JT9-30 ??
> =20
> I thought you would prefer to stay with BS =96 sigh!
> =20
> 73 Terry
> =20
>=20
> From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_grou=
p@blacksheep.org] On Behalf Of Stefan Sch=E4fer
> Sent: 30 October 2012 00:49
> To: rsgb_lf_group@blacksheep.org
> Subject: Re: LF: DK7FC-DF6NM
>=20
> =20
>=20
> Am 30.10.2012 01:41, schrieb Terry GW0EZY:=20
> Stefan getting regular decodes from you =96 every 10 minutes. Will =
also try your JT9-10. Let us all know if another frequency offset is =
required.
>=20
> No, i'll stay at 137.44 kHz over the night.
>=20
>=20
> =20
> Sending emails is a pain!
> Is it? I like it :-)
>=20
>=20
> 73, Stefan
>=20
>=20