Return-Path: Received: from mtain-md03.r1000.mx.aol.com (mtain-md03.r1000.mx.aol.com [172.29.96.87]) by air-de08.mail.aol.com (v129.10) with ESMTP id MAILINDE082-5ebf4daf7a5323d; Wed, 20 Apr 2011 20:29:07 -0400 Received: from post.thorcom.com (post.thorcom.com [195.171.43.25]) by mtain-md03.r1000.mx.aol.com (Internet Inbound) with ESMTP id B7A2D3800008F; Wed, 20 Apr 2011 20:29:05 -0400 (EDT) Received: from majordom by post.thorcom.com with local (Exim 4.14) id 1QChkn-0007U8-Il for rs_out_1@blacksheep.org; Thu, 21 Apr 2011 01:28:17 +0100 Received: from [195.171.43.32] (helo=relay1.thorcom.net) by post.thorcom.com with esmtp (Exim 4.14) id 1QChkn-0007Tz-21 for rsgb_lf_group@blacksheep.org; Thu, 21 Apr 2011 01:28:17 +0100 Received: from defout.telus.net ([204.209.205.13]) by relay1.thorcom.net with esmtp (Exim 4.63) (envelope-from ) id 1QChkk-0005Bz-I0 for rsgb_lf_group@blacksheep.org; Thu, 21 Apr 2011 01:28:17 +0100 Received: from edmwcm04 ([204.209.205.13]) by priv-edmwes33.telusplanet.net (InterMail vM.8.01.03.00 201-2260-125-20100507) with ESMTP id <20110421002829.TEQZ2191.priv-edmwes33.telusplanet.net@edmwcm04> for ; Wed, 20 Apr 2011 18:28:29 -0600 Received: from [192.168.1.74] ([75.157.142.115]) by edmwcm04 with bizsmtp id a0U61g00M2Vbb3f010U62z; Wed, 20 Apr 2011 18:28:06 -0600 X-Telus-Outbound-IP: 75.157.142.115 X-Authority-Analysis: v=1.1 cv=Ng3zRH4clTj1ZdurPHN6dZkLYtB3iR2+w+wkqIzToC4= c=1 sm=2 a=jVez_htjv6wA:10 a=VcZ9ZI0UkD4A:10 a=LGgl8L9ij00A:10 a=wV9FcBFsAAAA:8 a=pGLkceISAAAA:8 a=aatUQebYAAAA:8 a=9gxgzbuD3gcvCiM8F7AA:9 a=XFPmT9OICV8pH-x-ZCUA:7 a=wPNLvfGTeEIA:10 a=MSl-tDqOz04A:10 a=rBKJJ2Jc0C4A:10 a=MUn2LKkNXUQzLrsVa2sA:9 a=HhU5FNh0o5183DlpsNIA:7 Message-ID: <4DAF7A16.4040208@telus.net> Date: Wed, 20 Apr 2011 17:28:06 -0700 From: Scott Tilley User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.15) Gecko/20110303 Lightning/1.0b2 Thunderbird/3.1.9 MIME-Version: 1.0 To: rsgb_lf_group@blacksheep.org References: <4DAF42C1.8010401@telus.net> In-Reply-To: X-Spam-Score: 1.7 (+) X-Spam-Report: autolearn=disabled,HTML_MESSAGE=0.001,MAILTO_TO_SPAM_ADDR=0.276,RATWARE_GECKO_BUILD=1.426 Subject: Re: LF: MSK with a Class D transmitter...? Content-Type: multipart/alternative; boundary="------------030608010805040305040708" X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on post.thorcom.com X-Spam-Level: ** X-Spam-Status: No, hits=2.4 required=5.0 tests=FROM_ENDS_IN_NUMS,HTML_20_30, HTML_MESSAGE,MAILTO_TO_SPAM_ADDR autolearn=no version=2.63 X-SA-Exim-Scanned: Yes Sender: owner-rsgb_lf_group@blacksheep.org Precedence: bulk Reply-To: rsgb_lf_group@blacksheep.org X-Listname: rsgb_lf_group X-SA-Exim-Rcpt-To: rs_out_1@blacksheep.org X-SA-Exim-Scanned: No; SAEximRunCond expanded to false x-aol-global-disposition: G x-aol-sid: 3039ac1d60574daf7a50628e X-AOL-IP: 195.171.43.25 X-AOL-SPF: domain : blacksheep.org SPF : none X-Mailer: Unknown (No Version) --------------030608010805040305040708 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi Andy Holy mind bogglingness batman... Here's the parameters to make this real simple: - I want to generate a MSK signal out of the transmitter at 8970Hz. - I'm using Spectrum Lab, which allows me to create a MSK drive and at a baud rate I want at any frequency my sound card can generate. - SL allows me to output quadrature outputs. So, If I understand correctly pump said FET driver with the quadrature outputs from the sound card audio (squaring up the sine waves of course) and it should work? Thanks, Scott On 4/20/2011 2:09 PM, Andy Talbot wrote: > Bin too quick to type.. > NOt thinking straight... > You need to the upconvert either the resulting doubled audio tone by > twice the RF carrier, or upconvert first and double the final RF. > Same ideas for frequency doubling can be used. > See http://www.g4jnt.com/LFUpconv.pdf for a direct from audio > upconverter. > Must fully check before hitting SEND ! > Andy > G4JNT > > On 20 April 2011 21:50, Andy Talbot > wrote: > > I assume you are genrating the MSK from soundcard output, in which > case two options come to mind: > 1) Double the frequency. Full wave rectify the audio sinusoid, > pass the AC part of the result into a comparator and into the > divider. Alternatively, as the signal bandwidth is probably quite > low, square up the audio to start with, feed into one inpiut of an > XOR gate. Delay the waveform by 90 deg and feed this into the > othe side of the XOR. Output of XOR to divider as before > 2) Remove the divide by two, and replace with an inverter / > buffer pair to generate the out of phase drive signals. > The input now needs to be close to a 1:1 squarwave at output > frequency. Pass the soundcard audio into a comparator and make > sure it gives a 50% duty cycles. > Andy > www.g4jnt.com > ps. > or 3) Convince the software author the S/W needs modifying to > give a 2.F output > On 20 April 2011 21:32, Scott Tilley > wrote: > > Hi All > > I wonder if someone can explain to me how to feed an MSK > signal into a typical Class D transmitter? > > I mean by typical that the TX has a 4013 type /2 system > feeding two FET drivers to drive FETs in a push-pull > configuration. > > If I understand correctly due to the fact MSK does not have > amplitude component to its signal that a non-linear > transmitter can be used. > > So, how do you do this with a Class-D TX as often used in LF/VLF? > > Thanks, > Scott > VE7TIL > > > > > --------------030608010805040305040708 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Hi Andy

Holy mind bogglingness batman...

Here's the parameters to make this real simple:
- I want to generate a MSK signal out of the transmitter at 8970Hz.
- I'm using Spectrum Lab, which allows me to create a MSK drive and at a baud rate I want at any frequency my sound card can generate.
- SL allows me to output quadrature outputs.

So, If I understand correctly pump said FET driver with the quadrature outputs from the sound card audio (squaring up the sine waves of course) and it should work?

Thanks,
Scott





On 4/20/2011 2:09 PM, Andy Talbot wrote:
Bin too quick to type..
NOt thinking straight...
 
You need to the upconvert either the resulting doubled audio tone by twice the RF carrier, or upconvert first and double the final RF.  Same ideas for frequency doubling can be used.
 
See http://www.g4jnt.com/LFUpconv.pdf  for a direct from audio upconverter.
 
Must fully check before hitting SEND !
 
Andy
G4JNT

On 20 April 2011 21:50, Andy Talbot <andy.g4jnt@gmail.com> wrote:
I assume you are genrating the MSK from soundcard output, in which case two options come to mind:
 
1)  Double the frequency.  Full wave rectify the audio sinusoid, pass the AC part of the result into a comparator and into the divider.  Alternatively, as the signal bandwidth is probably quite low, square up the audio to start with, feed into one inpiut of an XOR gate.  Delay the waveform by 90 deg and feed this into the othe side of the XOR.    Output of XOR to divider as before
 
2)   Remove the  divide by two, and replace with an inverter / buffer pair to generate the out of phase drive signals.   The  input now needs to be close to a 1:1 squarwave at output frequency.   Pass the soundcard audio into a comparator and make sure it gives a 50% duty cycles.
 
 
Andy
 
ps.
or 3)    Convince the software author the S/W needs modifying to give a 2.F output
 
 
On 20 April 2011 21:32, Scott Tilley <sthed475@telus.net> wrote:
Hi All

I wonder if someone can explain to me how to feed an MSK signal into a typical Class D transmitter?

I mean by typical that the TX has a 4013 type /2 system feeding two FET drivers to drive FETs in a push-pull configuration.

If I understand correctly due to the fact MSK does not have amplitude component to its signal that a non-linear transmitter can be used.

So, how do you do this with a Class-D TX as often used in LF/VLF?

Thanks,
Scott
VE7TIL






--------------030608010805040305040708--