DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=btopenworld.com;
  h=DKIM-Signature:X-Yahoo-Newman-Property:X-YMail-OSG:X-Yahoo-SMTP:Received:Message-ID:From:To:References:In-Reply-To:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE;
  b=wnr2OEf/YucnbhuVHt2IAjYwHHru3tE7Q6gtaScRBWi25EwXH/SJhQ5V6hDYwLDAjQ7hmKGA/dZdZcIxRAmYpr3qMTF3/p5dj/FUA/oWAwqOcXTJkGPi9d+/zSgEQMucFJm85L+Z/z7d8Y3JA3d+zlInTB4NXuHd3Q0OXJyMWFY=  ;
Message-ID: <49A09117B8F441CD8818AC2781B85FC3@JimPC>
From: "James Moritz" <james.moritz@btopenworld.com>
To: <rsgb_lf_group@blacksheep.org>
References: <4F2AF61C.00002D.04364@BOB-PC> <C3285FEA631F4F4C950FBF7B48E65A87@AGB>
In-Reply-To: <C3285FEA631F4F4C950FBF7B48E65A87@AGB>
Date: Thu, 2 Feb 2012 21:31:03 -0000
MIME-Version: 1.0
DomainKey-Status: good (testing) 
Subject: Re: LF: New to group
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
X-AOL-SCOLL-URL_COUNT: 0  
X-AOL-SCOLL-AUTHENTICATION: mail_rly_antispam_dkim-m003.1 ; domain : btopenworld.com DKIM : pass  
x-aol-sid: 3039ac1d404c4f2b0b562cfd
X-AOL-IP: 195.171.43.25
X-AOL-SPF: domain : blacksheep.org SPF : none


Dear Bob, Graham,

I think you mean it should be 10.136 USB; to get signals centred on 137.5kHz 
to an audio output of 1.5kHz, the carrier should be at 136.0kHz

Also, when using a converter, it would be worth checking the frequency 
accuracy of the 10MHz conversion oscillator - it should be no more than a 
few 10s of hertz out if  there is not to be serious mis-alignment beteen the 
expected and actual received frequencies, considering the slower Op32 "band" 
is only 100Hz wide. The RX frequency can be offset slightly to compensate 
for an error in the converter frequency (or for an error in the RX 
frequency, for that matter...).

Cheers, Jim Moritz
73 de M0BMU