Message-ID: <20090208083646.r4a0ja6obglwogow@webmail4.kuleuven.be>
Date: Sun, 08 Feb 2009 08:36:46 +0100
From: Rik Strobbe <Rik.Strobbe@fys.kuleuven.be>
To: rsgb_lf_group@blacksheep.org
References: 	<007a01c98928$ecb21240$8d01a8c0@JAYDELL><20090207222824.23xd7nm9mlr4ok48@webmail4.kuleuven.be><002001c9896c$d7da48d0$8d01a8c0@JAYDELL><008e01c9896e$a7743af0$6401a8c0@asus><004101c98970$67dba480$8d01a8c0@JAYDELL>
	<20090207232025.oujv32k40mkowc80@webmail4.kuleuven.be>
	<001501c98979$d77b9b20$8d01a8c0@JAYDELL>
In-Reply-To: <001501c98979$d77b9b20$8d01a8c0@JAYDELL>
MIME-Version: 1.0
Content-Disposition: inline
User-Agent: Internet Messaging Program (IMP) H3 (4.1.2)
Subject: Re: LF: WE2XGR/2 in MFSK8
Content-Type: text/plain;
	charset=ISO-8859-1;
	DelSp="Yes";
	format="flowed"
Content-Transfer-Encoding: quoted-printable
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Jay,

no overnight copy here

73, Rik

Quoting jrusgrove@comcast.net:

> FLdigi also works well http://www.w1hkj.com/Fldigi.html .
>
> Jay
>
> ----- Original Message ----- From: "Rik Strobbe"  =20
> <Rik.Strobbe@fys.kuleuven.be>
> To: <rsgb_lf_group@blacksheep.org>
> Sent: Saturday, February 07, 2009 5:20 PM
> Subject: Re: LF: WE2XGR/2 in MFSK8
>
>
> Here Stream and Multipsk are working side by side for almost 1 hour
> now (fingers crossed).
> However no copy so far.
> I leave them running overnight.
>
> 73, Rik  ON7YD - OR7T
>
> Quoting jrusgrove@comcast.net:
>
>> Gary
>>
>> The program keeps running okay here.
>>
>> A couple other points though. Unlike Multipsk one has to specify the
>> lower edge of the bandpass - not the middle. This is 120 Hz below the
>> center. In other words if 800 Hz is your received audio center
>> frequency set the frequency to 680. Maybe there is a way to set it to
>> the center...if so I havn't found it.
>>
>> The bigger problem is with other applications running at the same time.
>> Just opened an internet browser and copy went to garbage. MultiPSK kept
>> decoding properly.
>>
>> Jay
>>
>>
>> ----- Original Message ----- From: "Gary - G4WGT" <g4wgt@tiscali.co.uk>
>> To: <rsgb_lf_group@blacksheep.org>
>> Sent: Saturday, February 07, 2009 4:54 PM
>> Subject: RE: LF: WE2XGR/2 in MFSK8
>>
>>
>>> Jay, LF,
>>>
>>> I also downloaded Stream & it runs for about 30 seconds & freezes.
>>>
>>> 73 - Gary - G4WGT.
>>>
>>> -----Original Message-----
>>> From: owner-rsgb_lf_group@blacksheep.org
>>> [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of
>>> jrusgrove@comcast.net
>>> Sent: 07 February 2009 21:42
>>> To: rsgb_lf_group@blacksheep.org
>>> Subject: Re: LF: WE2XGR/2 in MFSK8
>>>
>>> Rik and group
>>>
>>> Confirming start at 2130Z.
>>>
>>> Downloaded Stream earlier and was unable to get it to work. MultiPSK wor=
ks
>>> fine. May very well be
>>> cockpit error. Will  look into it.
>>>
>>> Jay
>>>
>>>
>>> ----- Original Message ----- From: "Rik Strobbe"    =20
>>> <Rik.Strobbe@fys.kuleuven.be>
>>> To: <rsgb_lf_group@blacksheep.org>
>>> Sent: Saturday, February 07, 2009 4:28 PM
>>> Subject: Re: LF: WE2XGR/2 in MFSK8
>>>
>>>
>>>> Jay,
>>>>
>>>> It just downloaded / installed stream (IZ8BLY).
>>>> RX / PC is on 508.5 overnight
>>>>
>>>> 73, Rik  ON7YD - OR7T
>>>>
>>>> Quoting jrusgrove@comcast.net:
>>>>
>>>>> WE2XGR/2 will be transmitting in MFSK8 mode on 508.5 kHz from 2130Z -
>>>>> 0000Z tonight. Reports are appreciated.
>>>>>
>>>>> When using MultiPSK as the decoder be advised that the program has bee=
n
>>>>> known to occasionally go on 'walkabout' after loss of signal. Stopping
>>>>> and restarting the decoder seems to solve the problem.
>>>>>
>>>>> Jay  W1VD  WD2XNS  WE2XGR/2
>>>>
>>>>
>>>>
>>>> Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
>>>>
>>>>
>>>
>>>
>>>
>
>
>
> Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm



Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm