Message-ID: <20090204232519.zgxyis76wx0kk8ck@webmail4.kuleuven.be>
Date: Wed, 04 Feb 2009 23:25:19 +0100
From: Rik Strobbe <Rik.Strobbe@fys.kuleuven.be>
To: rsgb_lf_group@blacksheep.org
References: 	<01eb01c9832c$74945e50$a402a8c0@Inspiron><20090131111012.i80joik1ztc0wggk@webmail4.kuleuven.be><AD8469FDDC2A4CE1A2AD0DA3753E415C@JimPC><000f01c983b5$cfe04330$8d01a8c0@JAYDELL><20090131200626.39efb3dc@lurcher>
	<071798B2D2F8408E9570FC11F569524C@AGB><27CD4CCC51DF4FEBB3972EA48A91D068@AGB>
	<20090204223221.yd4hyv5n06ko8c44@webmail4.kuleuven.be>
	<CF8E217110774A38BA0E6B3C169CA6AD@AGB>
In-Reply-To: <CF8E217110774A38BA0E6B3C169CA6AD@AGB>
MIME-Version: 1.0
Content-Disposition: inline
User-Agent: Internet Messaging Program (IMP) H3 (4.1.2)
Subject: Re: LF: Olivia 500 x 8  MFSK16  NOW RUNNING
Content-Type: text/plain;
	charset=ISO-8859-1;
	DelSp="Yes";
	format="flowed"
Content-Transfer-Encoding: quoted-printable
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Graham,

despite good audible signals I did not manage to decode the MFSK16 signal.
Most likely due to my lack of experience.

I am now closing the station to get some sleep.

73, Rik  ON7YD - OR7T

PS:
I just noticed a very odd event on 500: a CW QSO (between GI4DPE, 549 =20
here, and G3GNR, not audible).

Quoting Graham <g8fzk@g8fzk.fsnet.co.uk>:

> Ok Rik,
>
> Yes ... hihi
>
> Running
>
> USB Dial  freq - 501.000  Khz
>
> olivia  250 x 8  centre freq      2000  Hz audio    503 Khz  rf
>
> MFSK  16  centre freq  1000 Hz audio     502Khz rf
>
> Tnx - G ...
>
>
>
> --------------------------------------------------
> From: "Rik Strobbe" <Rik.Strobbe@fys.kuleuven.be>
> Sent: Wednesday, February 04, 2009 9:32 PM
> To: <rsgb_lf_group@blacksheep.org>
> Subject: Re: LF: Olivia 500 x 8  MFSK16  NOW RUNNING
>
>>
>> Graham,
>>
>> I just installed multipsk.
>> I believe it is the most chaotic programme I have ever seen.
>>
>> Right now 21:28UTC I hear alternating signals on 502 and 503.
>>
>> As I am not in the mood of reading the multipsk manual today could you
>> just tell me what mode is running where and what dial frequency / mode
>> (USB or LSB) I should set the RX to?
>>
>> 73, Rik  ON7YD - OR7T
>>
>> Quoting Graham <g8fzk@g8fzk.fsnet.co.uk>:
>>
>>> Modes changed
>>>
>>> MT63   STOPPED
>>>
>>> MFSK16 ,  Centre freq   1000 Hz audio
>>>
>>> Approx  15 watts peak per stream
>>>
>>> Thanks for reports .. will run this config  an hour or so
>>>
>>> G ..
>>>
>>> --------------------------------------------------
>>> From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
>>> Sent: Wednesday, February 04, 2009 7:39 PM
>>> To: <rsgb_lf_group@blacksheep.org>
>>> Subject: LF: If anyones about , MT63  x 500 Hz and Olivia 500 x 8
>>> running now 1935 hrs
>>>
>>>>
>>>> As a follow on to some tests  with Gary  , with Olivia  500 x 8 and the
>>>> original MT63 system
>>>>
>>>> Running  two  data streams now at about 10  watts per mode , carrier
>>>> frequencies are :-
>>>>
>>>> mt63   501.5 to  502 Khz
>>>>
>>>> olivia 500x8  503 Khz +/-  250 Hz
>>>>
>>>> The book says mt63 should not print as well as olivia .....
>>>>
>>>> tnx - G ..
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>>
>>>> No virus found in this incoming message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date:
>>>> 02/03/09 17:48:00
>>>>
>>
>>
>>
>> Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
>>
>>
>>
>
>
>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date:  =20
>> 02/03/09 17:48:00
>>



Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm