Received-SPF: neutral (gmail.com: 193.82.116.20 is neither permitted nor denied by best guess record for domain of owner-rsgb_lf_group@blacksheep.org)
Message-ID: <20060819231248.81fh9er3m1ogkswk@webmail3.kuleuven.be>
Date: Sat, 19 Aug 2006 23:12:48 +0200
From: Rik Strobbe <Rik.Strobbe@fys.kuleuven.be>
To: rsgb_lf_group@blacksheep.org
References: <20060819.164627.3204.4.riese-k3djc@juno.com>
In-Reply-To: <20060819.164627.3204.4.riese-k3djc@juno.com>
MIME-Version: 1.0
Content-Disposition: inline
User-Agent: Internet Messaging Program (IMP) H3 (4.1.2)
Subject: Re: LF: TIP: modifiying X-tals
Content-Type: text/plain;
	charset=UTF-8;
	DelSp="Yes";
	format="flowed"
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Status: O

I even used sandpaper to make the quarz thinner and thus increase the  
frequency. That worked sometimes up to 10%.

73, Rik  ON7YD - OR7T

Quoting riese-k3djc@juno.com:

> In the ol days we would use a pencil or rub a bit of solder on the face
> real hams used ? acid to etch and raise the frequency,, I dont remember
> what the acid was but the local chemical company would sell a bit
>
> drill a hole in the mount face, tap it and use a screw to apply
> pressure and move the frequency around
>
> Bob K3DJC
>
>
> On Sat, 19 Aug 2006 21:16:13 +0200 "Dick" <knaap159@zonnet.nl> writes:
> For those who didn't know, use following 'trick' to tune your own X-tal.
> (found it in a magazine from the VERON)
>
> Take an permant marker pen ("Edding, or similar) and put a little
> stripe/line on the X-tal plate.
> You will notice that the frequency goes down a bit.


Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm