Message-ID: <010301c829fb$72810f90$46726a58@wgt01>
From: "Gary - G4WGT" <g4wgt@tiscali.co.uk>
To: <rsgb_lf_group@blacksheep.org>
References: <PAEFLMFGBDKKCONLMLBIGECECNAA.ganymede444@btopenworld.com>
Date: Sun, 18 Nov 2007 15:55:31 -0000
MIME-Version: 1.0
Subject: Re: LF: 500 KHz RTTY test
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Dave, LF,

Thank you for the report Dave, looks like the mode is working quite well at 
distance. A few are decoding it quite well now.

Next, a 2 way QSO !!

73

Gary - G4WGT - IO83qp

----- Original Message ----- 
From: "Dave G3WCB" <ganymede444@btopenworld.com>
To: <rsgb_lf_group@blacksheep.org>
Sent: Sunday, November 18, 2007 3:43 PM
Subject: RE: LF: 500 KHz RTTY test


> Hi, Gary.
>
> Copying your 22/23Hz RTTYsigs here also. The G0MRF beaon is very strong at
> this QTH, but you are 100% during the breaks in the G0MRF beacon.
> I'm using WinWarbler (freeware), which works fine but is a bit "wide open"
> and gets distracted by any other nearby transmissions.
>
> "G4WGT IO83QP TESTING", "JUMPS OVER THE LAZY DOG G4WGT G4WGT RYRYRYJ"
> etc,etc.
>
> 73, Dave G3WCB IO91RM
>
> -----Original Message-----
> From: owner-rsgb_lf_group@blacksheep.org
> [mailto:owner-rsgb_lf_group@blacksheep.org]On Behalf Of Gary - G4WGT
> Sent: 18 November 2007 15:09
> To: rsgb_lf_group@blacksheep.org
> Subject: Re: LF: 500 KHz RTTY test
>
>
> Chris, LF,
>
> Thank you for the report, keep watching.
>
> 73
>
> Gary - G4WGT - IO83qp
>
> ----- Original Message -----
> From: "Chris McCarthy" <chris.decibel@googlemail.com>
> To: <rsgb_lf_group@blacksheep.org>
> Sent: Sunday, November 18, 2007 2:55 PM
> Subject: Re: LF: 500 KHz RTTY test
>
>
>> Gary,
>> I have been hearing you for the last 45 minutes, but unable to resolve so
>> far. Your about S3.
>> Chris, G3XVL
>>
>> On 18/11/2007, Gary - G4WGT <g4wgt@tiscali.co.uk> wrote:
>>>
>>> Hi All,
>>>
>>> Just begun testing on 503.600 KHz using RTTY, 22 bd, 23 Hz shift.
>>>
>>> It is possible that this slower speed will decode better at the narrow
>>> shift
>>> over greater distances.
>>>
>>> I will appreciate any reports.
>>>
>>> The software I am using is MMTTY.
>>>
>>> 73
>>>
>>> Gary - G4WGT - IO83qp
>>>
>>>
>>
>
>
>
>