DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=btinternet.com;
  h=DKIM-Signature:Received:X-Yahoo-SMTP:X-YMail-OSG:X-Yahoo-Newman-Property:Message-ID:From:To:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE:X-Antivirus:X-Antivirus-Status;
  b=QGSdLdYky1Yruv8VoxCUtmusno2kdsukCUlNnpztCYNFGR8WdkItxT3rDDaV23wib6B9ClTlsThIbKnITZ8RiQV8tvvQyaHDTyav7bFVuxZNv6NHbwTj00dcaoU3HUmcUPPBwyZWejHVoLVjPioL5rTOS35AJR1MxkrowIRcufY=  ;
Message-ID: <008f01cb0b4d$a5d506e0$4001a8c0@lark>
From: "Alan Melia" <alan.melia@btinternet.com>
To: <rsgb_lf_group@blacksheep.org>
References: <AANLkTikj4VBsZY51m28i5hcPB9mzAJAuHTyFc3xYUAHN@mail.gmail.com>
Date: Sun, 13 Jun 2010 23:50:03 +0100
MIME-Version: 1.0
DomainKey-Status: good (testing) 
Subject: LF: Re: Static protection when using a soundcard as an Rx
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Hi Brian at these frequencies you can roll an insulated wire along the
ground and get a pretty big signal. The reason is that they "ground" is not
necesary at ground level due to the skin effect  in poor soils it can be may
metres below that (It probably wont work on the sea-shore).  There is then
not so much of a problem unless you get a direct strike nearby and big earth
currents. In that case there is not much that will save you. It is certainly
worth a try.

Alan G3NYK



----- Original Message ----- 
From: "Brian Reay" <g8osn.news@gmail.com>
To: <rsgb_lf_group@blacksheep.org>
Sent: Sunday, June 13, 2010 5:38 PM
Subject: LF: Static protection when using a soundcard as an Rx


> Hi All,
>
> My first post to the reflector.
>
> I plan to try using a sound card and a "long wire" (well as long as I can
> fit into the garden) antenna and later a kit lofted antenna but I'm
> concerned re static.
>
>
> Normally I'd add a "dc short" with an inductor but at 10kHz than is a big
> inductor. A resistor is another options.
>
> Does anyone have any other suggestions, please.
>
> 73
> Brian
>