DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=btinternet.com;
  h=Received:X-YMail-OSG:X-Yahoo-Newman-Property:Message-ID:From:To:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE;
  b=Oxy9c7MFUoWgUuki8eCuKZQepEv/X/v4whbqTdDGpXJd5bAYXfyVKyxriAzxRFEUswd4+pLrat43WTS8iHpndXUqGcr18JHm244H/jS2c1bYpwbi5BLkOEUflsKTaTIi/MeXEiV+5iYG5u71PRn9GGIY0Epa7nCvN5GZjUfUgKw=  ;
Message-ID: <008001c9cc2c$084162e0$0900a8c0@AM>
From: "Alan Melia" <alan.melia@btinternet.com>
To: <rsgb_lf_group@blacksheep.org>
References: <260286.17766.qm@web28508.mail.ukl.yahoo.com>
Date: Sun, 3 May 2009 21:00:26 +0100
MIME-Version: 1.0
DomainKey-Status: good (testing) 
Subject: LF: Re: Field Strength Meter - advice needed
Content-Type: text/plain;
	charset="UTF-8"
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Hi Chris the following things occur to me to try
1 the 2N3819 is a juction fet not a mosfet (as with Dick original design) so
is probably more likely to show changes in input (gate-source) current with
temperature. The input current of a mostfet will be negligable. I cant
remember what the original device was but if a 40673 for instance try a
BF981 which are readily available.

2 At a lower level of probability the permiability of ferrite changes with
temperature. I would not that to be anything like so great as problem
though.

I hope that helps to solve the problem.

Alan G3NYK
----- Original Message -----
From: "Chris Osborn" <g3xiz@yahoo.co.uk>
To: "LF Group" <rsgb_lf_group@blacksheep.org>
Sent: Sunday, May 03, 2009 6:13 PM
Subject: LF: Field Strength Meter - advice needed


LF,

I've just rebuilt PA0SE's field strength meter (LF Experimenters' Handbook),
modified for use on the 500 kHz band.

I've followed the published circuit as near as possible considering
available components,
the differences being:
a) I have used a small variable capacitor instead of the published varicaps.
b) I used a JFET 2N3819 in the front end instead of dual gate mosfets.
c) Obviously I now use the MW coil of the ferrite rod instead of the
published LW coil.

I have made a decent Helmholtz coil which gives a stable magnetic field yet
the
field strength meter's output voltage is very dependent on temperature and
can vary up to
30 %.

I would be most grateful for any advice on curing this problem as I've spent
hours trying
to correct it.

73 Chris G3XIZ