From: "Gary - G4WGT" <g4wgt@tiscali.co.uk>
To: <rsgb_lf_group@blacksheep.org>
References: <491A1E39.5040404@yahoo.com> <000301c944c8$62a70230$6401a8c0@asus> <007401c94512$aec713e0$6c01a8c0@DELL4>
Date: Thu, 13 Nov 2008 16:44:58 -0000
Message-ID: <003b01c945af$2a577da0$6401a8c0@asus>
MIME-Version: 1.0
In-Reply-To: <007401c94512$aec713e0$6c01a8c0@DELL4>
Thread-Index: AclFEvsGK5DXx5FmR56gN4TNe4WMeAAmyHCQ
Subject: LF: 506.500KHz signal.
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Jay, LF,

Thanks for the info, it certainly looks like it is your signal as the
pattern of CW looks to fit the time scale.

As I can only send small clips to LF which will not show the time at the
bottom I will send the complete SpecLab capture from this morning at 0310utc
& maybe you can confirm or deny it !!

Perhaps a QRSS03 periodically may be a good way of a positive ID. The
grabber is usually running 24/7.

Cheers,

Gary - G4WGT.



-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org
[mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of
jrusgrove@comcast.net
Sent: 12 November 2008 22:05
To: rsgb_lf_group@blacksheep.org
Subject: LF: Re: RE: /16 on the air 505.10kc CW mode

Gary

As other have pointed out, based on the frequency that is probably WE2XGR/2 
on 506.5 kHz. The beacon runs ~0000 to ~0430 Z with a 10 wpm cw ID every 15 
seconds or so with a break at the top of most hours looking for cw QSOs. As 
the season progresses

If you're interested I can also run QRSS3, 10 or any other mode by request.

Jay W1VD  WD2XNS  WE2XGR/2