Message-ID: <002601c0e496$e4dd2760$a6387ad5@default>
From: "Fred Rattray" <fred.rattray@btinternet.com>
To: rsgb_lf_group@blacksheep.org
References: <004b01c0e3e2$67164280$c05101d5@default>
Subject: LF: Re: Re: Enammeled Copper Wire
Date: Thu, 24 May 2001 20:55:14 -0000
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Sender: <majordom@post.thorcom.com>

Many thanks Alan for the tip , and yes it is a bit of a large quantity. I
Have a reel of 22swg with about 1000 metres on and was going to use this for
my Magnetometer but it is not really thick enough. Anyway cheers again.

Fred


----- Original Message -----
From: "Alan Melia" <Alan.Melia@btinternet.com>
To: <rsgb_lf_group@blacksheep.org>
Sent: 23 May 2001 23:44
Subject: LF: Re: Enammeled Copper Wire


> Hi Fred that is really a commercial quantity you want. A suggestion I
might
> make....If I wanted that much I might seek out a local electric motor
> rewinder. They must buy this stuff buy the cart-load. A local one here I
did
> some radio work for has racks of the stuff in his stores. See if you can
get
> a reel from him or whether he would buy you a reel with his next order for
a
> small handling charge. You get his bulk prices then.
>
> Cheers de Alan G3NYK
> Alan.Melia@btinternet.com
>
> -----Original Message-----
> From: Fred Rattray <fred.rattray@btinternet.com>
> To: Lf Group <rsgb_lf_group@blacksheep.org>
> Date: 23 May 2001 23:10
> Subject: LF: Enammeled Copper Wire
>
>
> Does anyone know a cheap source of enammeled copper wire.
> 18 or 20 SWG?
> Its for a toroid I,m to wind for a Proton Magnetometer and I need in
excess
> of 500 metres.
>
> 73
> Fred
> G4SPR
> Cumbria.
>
>
>
>
>