Message-ID: <001e01cbec7b$80e73640$0401a8c0@xphd97xgq27nyf>
From: "mal hamilton" <g3kevmal@talktalk.net>
To: <rsgb_lf_group@blacksheep.org>
References: <0ED23F32B1C646FABE803BCC6BBE8704@JimPC>
Date: Sun, 27 Mar 2011 13:35:49 +0100
MIME-Version: 1.0
Subject: LF: Re: M0BMU 500kHz /P
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Jim
Qrv now calling CQ and should be about later on. Plenty of PA0 acty normally
all on normal CW.
de mal/g3kev

----- Original Message -----
From: "James Moritz" <james.moritz@btopenworld.com>
To: <rsgb_lf_group@blacksheep.org>
Sent: Sunday, March 27, 2011 1:59 PM
Subject: LF: M0BMU 500kHz /P


> Dear LF Group,
>
> If all goes according to plan, I hope to be QRV from a portable location a
> few miles away on 500kHz later this afternoon / evening. I set up the
> antennas yesterday; a 15m high "umbrella" for TX, and 1/2 a K9AY array
> aiming east. The objective is to get good reception of Eu stations that
> might be active - reception of signals in an easterly direction at my home
> QTH is very poor due to local QRM from the broadcast stations. From
previous
> experience, the TX antenna should be quite efficient, and provided I can
> actually tune it up, I should get several watts ERP.
>
> I hope to be QRV in a few hours time; I will probably be able to check
> E-mail at that time, so let me know if you will be QRV.
>
> Cheers, Jim Moritz
> 73 de M0BMU
>
>