Message-ID: <001c01c3032e$fdfcfbe0$ea00a8c0@f3a3a2>
From: "Laurie Mayhead" <laurie@g3aqc.freeserve.co.uk>
To: rsgb_lf_group@blacksheep.org
References: <006101c302d7$b64c8c40$6507a8c0@Main>
Date: Tue, 15 Apr 2003 10:01:19 +0100
MIME-Version: 1.0
Subject: LF: Re: W&G assistance
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Sender: <owner-rsgb_lf_group@blacksheep.org>
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


----- Original Message -----
From: "Alan Melia" <Alan.Melia@btinternet.com>
To: "LF-Group" <rsgb_lf_group@blacksheep.org>
Sent: Monday, April 14, 2003 11:43 PM
Subject: LF: W&G assistance


> I wionder if anyone can answer thie qery below.....I refered John to the
> LWCA message board but I dont think he got any answers.
> ------------------
> Can tell me what the following error codes in a W&G SPM-19
> selective level meter mean??
> 1--006
> 1--201
>
> They are in the Operators manual under chapter 6 they tell me, but I only
> have the WS manual and it refers me back to the Operators
manual.......Doh.
> If you know, can you E-mail me on htp@lisp.com.au
> John Harbor
> ------------------
>
> I am sure somebody on here mentioned the -19 at some time in the past.
>
> Thanks and Cheers de Alan G3NYK
> alan.melia@btinternet.com
>
> 1...006 Level above selective branch is too low.
   1...007  Level above selective branch is too high.
Possible faults:
Failure of one or more modules in the mixer section.

> 1...201 Calibration adjusting network
    Insufficient extent with analog
    1...202
     Insufficient extent with didital
Possible origins of fault
*Defective cal. adjusting network if in IF amp.
*Basic gain of complete equipment is set wrong
*Defective cal. signal or gain setting
>
> Hope this helps although I find it confusing (perhaps it has suffered in
the translation ) Laurie.
>