Message-ID: <001401c3918a$9e722160$14298351@oldpc>
From: "Lech Laszkiewicz" <Lechlaski@btinternet.com>
To: rsgb_lf_group@blacksheep.org
References: <3f87610aa7834@wp.pl>
Date: Mon, 13 Oct 2003 14:04:27 +0100
MIME-Version: 1.0
Subject: LF: Re: UA, YU & G from SP
Content-Type: text/plain; charset=iso-8859-2; format=flowed
Content-Transfer-Encoding: 8bit
Sender: <owner-rsgb_lf_group@blacksheep.org>
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org

Marek,
Ja uzywam FT990 napendzania LF i do odbioru od cztertech lat. Do nadawania
dziele 136MHz przez 100 (z bardzo latwa modification do FT990). Caly opis
tego byl w G3LDO ksiazeczce. Podaj mi Twoj adres pocztowy to ci wysle
szczeguly i shematy plytki dzielnika przez 100 itd.
73 de G3KAU  Lech
----- Original Message -----
From: "Marek Przybyszewski" <sq5bpm@wp.pl>
To: <rsgb_lf_group@blacksheep.org>
Sent: Saturday, October 11, 2003 2:46 AM
Subject: LF: UA, YU & G from SP


> Dear all,
>
> It was a nice evening - three new countries worked:
>
> 22:28z         RU6LA  1383km M/O @3s dots
> 22:46z & 23:41 YU7AR   704km O/O @3s dots
> 01:00z         M0BMU  1467km M/M @10s dots
>
> A few minutes before getting on-air, I finished changing the
> output trafo - now there are two cores sticked together, as for
> the ouput power I am using now, one core is not enough - gets
> HOT quickly. 12A & 38V, so around 400W has been put into the
> antenna. Antenna current was around 1.5A. Still not much, but
> enough. The TX has been totally rebuilt since my first QSO with
> SM6PXJ, now there's a nice metal case and almost everything is
> well-mounted. Almost everything - the RX preamp still uses a
> double-sided scotch tape and it fell down during the last QSO :)
> What a shame, I have to change the preamp board, cause it was
> not designed to be mounted using screws or something HI
>
> I must say I AM SORRY to everyone that might have been
> interfered by my poor VCO, sweeping here and there +/-30Hz. The
> previous VXO was better as for the stability, but it used to
> stop generating sometimes and this might have caused serious
> damage to the output FETs... Anyway, I will look for another
> signal source.
>
> Thanks to everyone, I will try to be on-air tomorrow evening
> also.
>
> vy 73! Marek SQ5BPM
> SP5ZCC Scouts Radio Club
> http://www.sp5zcc.waw.pl
>
>
>
> ----------------------------------------------------------------------
> Wojna jest pieklem, a pokój jest cholernie nudny - "Buffalo Soldiers"
> - juz w kinach!!! < http://film.wp.pl/p/film.html?id=7506 >
>
>
>
>