Message-ID: <001101c85f9d$389f5750$0e00000a@AGB>
From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
To: <rsgb_lf_group@blacksheep.org>
References: <BAY124-W36EA7EC08E9225B2159A21CF380@phx.gbl> <007601c85ed7$46aef5b0$d40ce110$@dynip.com> <002801c85ee0$9eddf250$0d00000a@AGB> <005101c85ee6$045f42a0$0900a8c0@Lark> <003a01c85eed$928d6820$0d00000a@AGB> <004801c85f3f$6e2117a0$0900a8c0@Lark>
Date: Fri, 25 Jan 2008 21:57:01 -0000
MIME-Version: 1.0
Subject: LF: Re: Re: Droitwich lock [was WOLF....
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Ok Alan,

This is a quartzlock, model 2A . I get a good signal on 198, im using it at 
the moment , be intresting to  se if anyone detects any change in frequency, 
but of course the signal is derived from the 800 hz tone from the sound 
card, so that may drift as well , been running 6 hours so  should be warmed 
up

Using the 'triggering scope' method of comparing frequency's  i can observe 
a change about a fixed point , so ive set for the mid point , which looks to 
be correct , todate im not totally sure what level of 'change' im observing 
.. hihi

G ..


----- Original Message ----- 
From: "Alan Melia" <alan.melia@btinternet.com>
To: <rsgb_lf_group@blacksheep.org>
Sent: Friday, January 25, 2008 10:24 AM
Subject: LF: Re: Droitwich lock [was WOLF....


> Hi Graham, yes ok, I have a Halcyon and that unlocks sometimes after dark.
> It may be due to noise and the use of the internal ferrite rod. There are
> quite big phase shifts after dark sometimes, and there is (was last time I
> measured it) a slight sytematic wobble, but it is only a few parts in 
> 10^10
> and has a period of around 1000secs. I dont think I would use mine for a
> direct standard without a better aerial. Short term standard is an Austron
> 1250a....very nice.
> Alan
>
> ----- Original Message -----
> From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
> To: <rsgb_lf_group@blacksheep.org>
> Sent: Friday, January 25, 2008 12:59 AM
> Subject: LF: Re: Re: WOLF BEACON - 503.000 KHZ
>
>
>> Ok Alan,
>>
>> Should be the bbc on 198 khz ! , i have a idea it varies slightly .. the
>> ppl that is .. not the bbc
>> ... but by how much , im not sure
>>
>> G ..
>>
>>
>> ----- Original Message -----
>> From: "Alan Melia" <alan.melia@btinternet.com>
>> To: <rsgb_lf_group@blacksheep.org>
>> Sent: Friday, January 25, 2008 12:05 AM
>> Subject: LF: Re: WOLF BEACON - 503.000 KHZ
>>
>>
>> > Hi Graham what are you locked to ??
>> > Alan G3NYK
>> >
>> > ----- Original Message -----
>> > From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
>> > To: <rsgb_lf_group@blacksheep.org>
>> > Sent: Thursday, January 24, 2008 11:26 PM
>> > Subject: LF: WOLF BEACON - 503.000 KHZ
>> >
>> >
>> > Hi All,
>> >
>> > Running WOLF 10 Beacon on  503.000 Khz ,
>> >
>> > Reports if possible, aslo frequency ? possible  2 hz LF ??
>> >
>> > Running tx locked to  off air standard ,
>> >
>> > intrested if fequency has 'slow cyclic drif'  ??
>> >
>> > tnx - Graham .
>> >
>> >
>> >
>> >
>> >
>> > --
>> > No virus found in this incoming message.
>> > Checked by AVG Free Edition.
>> > Version: 7.5.516 / Virus Database: 269.19.10/1241 - Release Date:
>> > 1/24/2008 09:58
>> >
>> >
>>
>>
>>
>
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.11/1242 - Release Date: 
> 1/24/2008 20:32
>
>