Envelope-to: dave@picks.force9.co.uk
Delivery-date: Mon, 25 Jul 2005 18:26:20 +0100
Message-ID: <000701c59135$902a1b60$cfe4fc3e@l8p8y6>
From: "hamilton mal" <g3kev.ham@virgin.net>
To: rsgb_lf_group@blacksheep.org
References: <NKEMLGOEKANPNJOBFBAFOENECFAA.g4wgt@tiscali.co.uk>
Date: Mon, 25 Jul 2005 17:25:37 +0100
MIME-Version: 1.0
Subject: LF: Re: RE: Re: RJ45
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


----- Original Message -----
From: "Gary - G4WGT" <g4wgt@tiscali.co.uk>
To: <rsgb_lf_group@blacksheep.org>
Sent: Saturday, July 23, 2005 8:49 PM
Subject: LF: RE: Re: RJ45


> Hi Mal,
>
> Presuming that the RJ45 is an 8 way connector you can readily obtain 1, 2
&
> 4 way face plates for CAT5e network terminations, also you can obtain
patch
> panels from 16 way upwards for cabinet installations so you could possibly
> obtain something like that & parallel the sockets to your requirements.
> these are available from my local supplier CPC in Preston who are part of
> the Farnell group so you could try Farnell over there.
>
> Regards,
>
> Gary - G4WGT - IO83qp

Hi Gary
Tnx for the info and all the others that responded but it does not solve the
problem because there is a min charge of Ł10
and the sockets only cost 70 pence each. I did however do some searching
around Scarboro and a local PC business consortium that build computers let
me have a couple free of charge.
73 de Mal/G3KEV

>
> Web : http://myweb.tiscali.co.uk/wgtaylor
>
> -----Original Message-----
> From: owner-rsgb_lf_group@blacksheep.org
> [mailto:owner-rsgb_lf_group@blacksheep.org]On Behalf Of Stewart Nelson
> Sent: 23 July 2005 20:16
> To: rsgb_lf_group@blacksheep.org
> Subject: LF: Re: RJ45
>
>
> Hi Mal,
>
> Since RJ45 is commonly used for Ethernet, you should be able to
> find the F/F adapter at most shops that sell or install computer
> network equipement.  If not, try the guys who do business phone
> systems.  However, a three-way socket block may be hard
> to find, because common uses of RJ45 (Ethernet, ISDN, T1/E1,
> console cables) allow only point-to-point connections.
>
> 73.
>
> Stewart KK7KA
>
> ----- Original Message -----
> From: hamilton mal
> To: rsgb_lf_group@blacksheep.org
> Cc: Warren K2ORS/WD2XGJ
> Sent: Saturday, July 23, 2005 10:04 AM
> Subject: LF: RJ45
>
>
>   Hi All
> I need a RJ45 inline female/female connector and cannot find any in the
High
> St
> shops or Electrical shops. They do have male/male cables but not female.
> There
> are millions available on the internet but only in large quantities.
> I need preferably a 3 way female socket block so that I can insert a male
> plug
> into it with the facility to plug 2 male plugs into the output for
separate
> devices. Does anyone know of a source for a single device.
> 73 de Mal/G3KEV
>
>
>