From: "IZ2JGB Giorgio Barinetti" <iz2jgb@arimi.it>
To: <rsgb_lf_group@blacksheep.org>
References: <CAHAQVWNXyu8L0g-NNb4pGoUK=x2sDkpvuKvs=5-gTq2sLMwxDA@mail.gmail.com> <505B92F1.8080401@iup.uni-heidelberg.de>
In-Reply-To: <505B92F1.8080401@iup.uni-heidelberg.de>
Date: Fri, 21 Sep 2012 00:38:51 +0200
Message-ID: <000001cd9780$b5234cd0$1f69e670$@it>
MIME-Version: 1.0
Thread-Index: Ac2XfOSQplO2CpnRTu2iGQwoYTfBUQAA3/hA
Content-Language: it
Subject: LF: R: Homebrew stuff
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Hi Stefan.

The lead-free solder is working but compared to the leaded one is really
brittle.

Lead give flexibility to the soldered joint.

Anyway if you want to try , buy a suitable tip and use it ony for leaded
free. (like petrol... hi)

Don't mix as they don't match.

73,
Giorgio.

-----Messaggio originale-----
Da: owner-rsgb_lf_group@blacksheep.org
[mailto:owner-rsgb_lf_group@blacksheep.org] Per conto di Stefan =
Sch=E4fer
Inviato: venerd=EC 21 settembre 2012 0.05
A: rsgb_lf_group@blacksheep.org
Oggetto: LF: Homebrew stuff

I like the homebrew suff pictures :-) There is quite individual ways to=20
build the equipment. Many use the copper plates as a board, i prefer the =

breadboard since i grew up with it :-)
That's my todays work, under construction:=20
https://dl.dropbox.com/u/19882028/LF/SDC1.JPG
An add-on to my LF PA. Guess what it is?! :-)

73, Stefan/DK7FC

PS: What do people think about lead-free solder? I considered to try it=20
but not sure if this is a good idea...



Am 20.09.2012 22:11, schrieb Roger Lapthorn:
> This evening, my WSPR tests are with the latest version of my homebrew =

> transverter, designed to be used with QRP rigs like the FT817 in=20
> "split" mode. The transmitter operates around 3.7MHz and transverts=20
> down to either 472 or 500kHz. On RX, the transverter simply passes the =

> RX signal through to the FT817 which is used on 472/500kHz. This makes =

> for a very simple yet effective design.
>
> I reverted to a double balanced mixer (SBL1 or ADE-1 or similar) for=20
> the TX mixer and this has made the design very stable and reliable=20
> now. The PA and ATU coils are air wound in the GW3UEP style on 22mm=20
> PVC pipe. The whole unit fits in a small plastic box.
>
> Already WSPR reports are coming through from PA, G, GW despite the use =

> of my short vertical tuned against a copper water tank ground and=20
> resonated with a tapped coil on a ferrite rod. Signal levels from some =

> suggest CW QSOs should be OK.
>
> Details of the transverter are available on my website and on my blog=20
> at=20
>
<http://g3xbm-qrp.blogspot.co.uk/2012/09/472500khz-transverter-finished.h=
tml
>.
>
> I hope this little circuit encourages a few newcomers to try the new=20
> band in due course. For now tests continue on 500kHz and further=20
> reports would be much appreciated.
>
> 73s
> Roger G3XBM
>
> --=20
> http://g3xbm-qrp.blogspot.com/
> http://www.g3xbm.co.uk
> https://sites.google.com/site/sub9khz/
> http://qss2.blogspot.com/
>
>

-----
Nessun virus nel messaggio.
Controllato da AVG - www.avg.com
Versione: 2012.0.2221 / Database dei virus: 2441/5281 -  Data di =
rilascio:
20/09/2012