From: "M. Sanders" <misan@xs4all.nl>
To: rsgb_lf_group@blacksheep.org
Subject: LF: RE: re:QRS beacon 137.192
Date: Sun, 1 Aug 1999 07:40:06 +0200
Message-ID: <000001bedbe0$4f6f3d00$c39a6dc2@v3q4v1>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Importance: Normal
In-reply-to: <000c01bedb78$a83a3ce0$84eb869f@beachwood.tinet.ie>
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org
Sender: <majordom@post.thorcom.com>

Dear Finbar,

Your signals have been identified on spectogram at 0530utc. I am not 100%
shure but almost every day this week around the same time i observed a
slowly drifting signal around 136.2 and it is not there today so this is
most likely to be your signal. I will monitor your signal until it fades or
until you stop transmitting and will report later via the reflector.

Best 73's and good luck on LF,

Michael Sanders, PA3BSH
mailto:pa3bsh@amsat.org


-----Oorspronkelijk bericht-----
Van: majordom@post.thorcom.com [mailto:majordom@post.thorcom.com]namens
Finbar O'Connor
Verzonden: zaterdag 31 juli 1999 19:17
Aan: rsgb_lf_group@blacksheep.org
Onderwerp: LF: re:QRS beacon 137.192


                           QRS  BEACON TEST  ON 137.192 KHZ   CRYSTAL
CONTROLLED.
I have put a qrs beacon on 137.192 khz  this afternoon, using a crystal I
found in the junk box , for 8777 khz/64  to give
on air frequency of 137.192 khz. Running  3 amps. Hope this will make up for
the drifting signal  when I had the beacon running during the week. I have
modified my memory keyer with a few resistors to slow down the  repeating
EI0CF callsign, but I am not sure if I have got the timing right.
best regards
Finbar     EI0CF.
p.s.  I will leave it running until  Sunday lunchtime ,ie  about  1300 utc.